Máquina de moldeo por inyección horizontal

Horizontal Injection Molding Machine

    * High precision and consistency in molding complex parts
    * Enhanced productivity through intuitive controls and efficient operation
    * Versatility to accommodate diverse manufacturing needs
    * Reliable performance and durability for long-term use
    * Commitment to safety and sustainability in every aspect of design and operation

    Category:

    Specification

    Model HMS-120 HMS-160 HMS-170 HMS-200
    International Specification UNIT 410-1200 596-1600 596-170 738-2000
    Injection Unit
    Screw Type A B C A B C A B C A B C
    Screw Diameter mm 36 40 45 40 45 50 40 45 50 45 50 55
    Shot Volume cc 178 220 278 253 320 395 253 320 395 398 491 594
    Theoretical Shotweight(PS) g 164 202 256 232 294 363 232 294 363 366 452 546
    oz 5.8 7.1 9.0 8.2 10.4 12.8 8.2 10.4 12.8 12.9 15.9 19.3
    Screwl:d Ratio L/D 23.3 21 18.7 22.5 20 18.0 22.5 20 18.0 22.2 10 18.2
    Injection Pressure Mpa 230 186 147 236 187 151 236 187 151 230 186 154
    Injection Rate g/sec 196 242 306 239 302 373 286 362 447 309 381 461
    Injection Speed mm/sec 209 206 248 211
    Screw Stroke mm/sec 175 201 201 250
    Screw Speed (stepless) rpm 244 237 242 211
    Clamping Unit
    Clamping Force KN 1200 1600 1700 2000
    Max Daylight mm 810 920 940 1040
    Mould Opening Stroke mm 360 420 420 490
    Space Between Tie Bar mm 410*410 460*460 470*470 530*530
    Mould Thickness Min/Max mm 150〜450 160〜500 170〜520 180〜550
    Ejector Force KN 42 42 42 49
    Ejector Stroke mm 120 140 140 150
    Number of Thimbles unit 5 5 5 5
    Power Unit
    Pump Motor power kw 18.5 22 23 26
    Hydraulic system pressure Mpa 17.5 17.5 17.5 17.5
    No of Temp Control Zones unit 4+1 4+1 4+1 4+1
    Heating Capacity kw 10.2 9.4 10.5 13.5
    General Unit
    Design Weight Ton 4.2 4.7 5.1 6.4
    Oil Tank Capacity L 200 200 230 300
    Machine Dimensions (LxWxD) m 4.75×1.18×2 4.9×1.2×2.1 4.9×1.2×2.165 5.45×1.32×2.185

    Specification 1

    Model HMS-260 HMS-320 HMS-400
    International Specification UNIT 1377-2600 1593-3200 2251-4000
    Injection Unit
    Screw Type A B C A B C A B C
    Screw Diameter mm 55 60 65 60 65 70 65 70 75
    Shot Volume cc 622 741 869 792 929 1078 1045 1212 1392
    Theoretical Shotweight(PS) g 573 682 800 728 855 991 962 1115 1280
    oz 20.2 24.0 28.2 25.7 30.2 35.0 33.9 39.3 45.2
    Screwl:d Ratio L/D 21.8 20.0 18.5 21.7 20.0 18.6 21.5 20 18.7
    Injection Pressure Mpa 221 186 158 201 171 148 215 186 162
    Injection Rate g/sec 407 485 569 560 657 762 327 379 435
    Injection Speed mm/sec 186 215 107
    Screw Stroke mm/sec 262 280 315
    Screw Speed (stepless) rpm 201 209 182
    Clamping Unit
    Clamping Force KN 2600 3200 4000
    Max Daylight mm 1130 1340 1460
    Mould Opening Stroke mm 530 660 730
    Space Between Tie Bar mm 575*575 680*680 730*730
    Mould Thickness Min/Max mm 200〜600 250〜680 280〜730
    Ejector Force KN 67.4 77.3 111.4
    Ejector Stroke mm 150 160 180
    Number of Thimbles unit 9 13 13
    Power Unit
    Pump Motor power kw 30 45 52
    Hydraulic system pressure Mpa 17.5 17.5 17.5
    No of Temp Control Zones unit 4+1 4+1 4+1
    Heating Capacity kw 17.2 23.2 30.9
    General Unit
    Design Weight Ton 8.6 12 16.1
    Oil Tank Capacity L 450 550 720
    Machine Dimensions (LxWxD) m 6.15*1.44*2.245 7.15*1.74*2.275 7.65*1.82*2.347

    Specification 2

    Model HMS-480 HMS-560 HMS-650
    International Specification UNIT 3071-4800 3958-5600 4976-6500
    Injection Unit
    Screw Type A B C A B C A B C
    Screw Diameter mm 70 80 85 75 85 95 80 90 100
    Shot Volume cc 1347 1759 1986 1767 2270 2835 2136 2704 3338
    Theoretical Shotweight(PS) g 1239 1619 1827 1626 2088 2608 1965 2487 3071
    oz 43.7 57.1 64.5 57.4 73.7 92.0 69.3 87.8 108.3
    Screwl:d Ratio L/D 23.7 20.7 19.5 23.5 20.7 18.5 24.8 22.0 19.8
    Injection Pressure Mpa 228 174 155 224 174 140 233 184 149
    Injection Rate g/sec 396 517 583 453 582 727 993 1257 1552
    Injection Speed mm/sec 112 111 215
    Screw Stroke mm/sec 350 400 425
    Screw Speed (stepless) rpm 200 225 210
    Clamping Unit
    Clamping Force KN 4800 5600 6500
    Max Daylight mm 1630 1710 1830
    Mould Opening Stroke mm 800 850 920
    Space Between Tie Bar mm 830*830 850*850 900*900
    Mould Thickness Min/Max mm 260〜830 350〜860 350〜910
    Ejector Force KN 111.4 166.4 181.8
    Ejector Stroke mm 250 250 260
    Number of Thimbles unit 17 17 13
    Power Unit
    Pump Motor power kw 61 30+45 30+52
    Hydraulic system pressure Mpa 17.5 17.5 17.5
    No of Temp Control Zones unit 5+1 5+1 5+1
    Heating Capacity kw 33.1 39 33.1
    General Unit
    Design Weight Ton 20 21.5 27
    Oil Tank Capacity L 800 850 1000
    Machine Dimensions (LxWxD) m 8.4*2.2*2.4 8.8*2.2*2.45 9.3*2.3*2.5

    Specification 3

    Model HMS-750 HMS-850 HMS-1000
    International Specification UNIT 6138-7500 7220-8500 9590-10000
    Injection Unit
    Screw Type A B C A B C A B C
    Screw Diameter mm 90 100 110 90 100 110 100 110 120
    Shot Volume cc 2704 3338 4039 3181 3927 4752 4320 5227 6220
    Theoretical Shotweight(PS) g 2487 3071 3716 2926 3613 4372 3974 4809 5723
    oz 87.8 108.3 131.1 103.2 127.5 154.2 140.2 169.6 201.9
    Screwl:d Ratio L/D 22.0 19.8 18.5 24.4 22.0 20.2 24.2 22.0 20.2
    Injection Pressure Mpa 227 184 152 227 184 152 222 184 154
    Injection Rate g/sec 1292 1595 1930 1416 1748 2115 1622 1963 2336
    Injection Speed mm/sec 221 242 224
    Screw Stroke mm/sec 425 500 550
    Screw Speed (stepless) rpm 200 200 149
    Clamping Unit
    Clamping Force KN 7500 8500 10000
    Max Daylight mm 1830 2100 2350
    Mould Opening Stroke mm 920 1025 1150
    Space Between Tie Bar mm 900*900 1100*1000 1200*1100
    Mould Thickness Min/Max mm 350〜910 400〜1075 450〜1200
    Ejector Force KN 181.8 269.5 269.5
    Ejector Stroke mm 265 320 350
    Number of Thimbles unit 13 21 21
    Power Unit
    Pump Motor power kw 45+61 52+61 61+61
    Hydraulic system pressure Mpa 17.5 17.5 17.5
    No of Temp Control Zones unit 5+1 5+1 5+1
    Heating Capacity kw 33.1 33.1 33.1
    General Unit
    Design Weight Ton 29 45 51
    Oil Tank Capacity L 1500 1600 1700
    Machine Dimensions (LxWxD) m 9.5*2.3*2.6 10.4*2.5*2.8 11.3*2.7*3